|Miller Engineering’s animated billboards
are our newest addition to our line of
animated neon signs. These new signs
incorporate many new design features
such as improved connectors, no painting
required, longer life, and stiffer
laminations. All animated neon billboard
signs have the same great benefits of all
Light Works neon signs: ready-to-run,
paper-thin, produce no heat, and have
realism second-to-none. Try one today
and you'll be Thrilled! All signs come with
a 3 AAA battery pack. Signs draw 95 ma.
Miller Engineering's Billboards are easy to
mount on your structure. Simply cut a small
.75" wide slot in the roof of your building,
insert the sign. Use a small amount of hot
melt glue or 5 minute epoxy on the topside of
the roof, at each end of the sign, plug in the
connector and you're done. It's that simple!
Click on image to see animation & larger version
#990 Billboard support. These supports will add that extra
detail to your billboard. Each kit comes with 6 supports that
can be cut to fit any one of our HO/O scale billboards.
#4804 Converter Module
#4804 - Converter module. This unit will
replace your battery pack. It will let you run
your signs off track voltage or your power
pack. Accepts an input voltage from 5 to 17
volts, AC or DC and outputs the required
4.5 volts for our signs. Will run up to 6
#4802 - 4.5volt AC/DC adapter, will run up to 3 signs.
#4803 - Large 4.5volt AC/DC adapter, and
will run up to 10 signs.
Copyright Miller Engineering 2013
|CITGO® is a registered trademark of CITGO Petroleum Corporation
used under license (by Miller Engineering.)
New! - For gluing tips click "HERE"